Installing Windows 10 from a USB drive using Command Prompt can be a convenient and efficient method, especially if your computer doesn’t have a DVD drive. This tutorial will guide you through the steps to install Windows 10 using Command Prompt.
Step 1: Connect the USB drive to your computer. Ensure that it is formatted as FAT32 and has at least 8GB of storage space.
Step 2: Open the Command Prompt. You can do this by pressing the Windows key + R, typing "cmd" into the Run dialog, and hitting Enter.
Step 3: In the Command Prompt, type "diskpart" and press Enter. This will open the Diskpart command-line tool.
Step 4: Type "list disk" and press Enter. This will display a list of all the disks connected to your computer.
Step 5: Identify which disk corresponds to your USB drive. Look for the disk size that matches the size of your USB drive. Take note of the disk number associated with it.
Step 6: Type "select disk [disk number]" (replace [disk number] with the actual disk number of your USB drive) and press Enter.
Step 7: Type "clean" and press Enter. This will erase all data on the USB drive.
Step 8: Once the drive is cleaned, type "create partition primary" and press Enter. This will create a primary partition on the USB drive.
Step 9: Type "select partition 1" and press Enter to select the newly created partition.
Step 10: Type "format fs=ntfs quick" and press Enter. This will format the partition as NTFS quickly.
Step 11: After the format is complete, type "active" and press Enter. This will make the partition active and bootable.
Step 12: Finally, type "exit" and press Enter to close the Diskpart tool.
Now, you can copy the contents of the Windows 10 installation files onto the USB drive. Once done, you can insert the USB drive into the target computer and boot from it to begin the Windows 10 installation process.
| Pros | Cons |
|---|---|
| 1. Simple and straightforward method to install Windows 10. | 1. Requires access to another computer with the command prompt. |
| 2. Using a USB drive is faster and more convenient than a DVD. | 2. May encounter compatibility issues with certain computers or BIOS settings. |
| 3. USB drives are reusable and can be easily carried around. | 3. The process may be intimidating for beginners not familiar with the command prompt. |
By following these steps, you can install Windows 10 from a USB drive using Command Prompt. This method offers flexibility and convenience, allowing you to install the operating system quickly and efficiently.
Video Tutorial:How to boot Windows 10 from command prompt?
How to boot PC through CMD?
To boot a PC using Command Prompt (CMD), follow these steps:
1. Press the Windows key + R to open the Run dialog box.
2. Type "cmd" (without quotes) in the Run dialog box and press Enter. This will open the Command Prompt.
3. In the Command Prompt window, type "shutdown /r /t 0" (without quotes) and press Enter. The /r flag indicates a restart, and the /t 0 flag sets the timeout to 0 seconds, meaning the restart will happen immediately.
4. After pressing Enter, you’ll see a message stating that the system will restart.
5. The PC will undergo a brief restart process, and the operating system will boot up again.
Please note that this method assumes you have administrative privileges on the PC. Also, it’s important to save any unsaved work before initiating a restart, as it will close all running programs and applications.
This method is suitable for users who prefer a command-line approach to restarting their PC or for advanced troubleshooting purposes. However, for regular restarts, it’s more convenient to use the standard graphical user interface methods, such as using the Start menu or the power button.
Always exercise caution when using command-line commands, as they can directly impact your system’s functionality.
How to boot PC using CMD?
Booting a PC using Command Prompt (CMD) is possible by following a few steps. Please note that these steps may vary slightly depending on the operating system you are using. Here’s a simple guide:
1. Press the Windows key + R to open the Run dialog box.
2. Type "cmd" and press Enter to open the Command Prompt.
3. In the Command Prompt window, type "shutdown /r" and press Enter to reboot the PC. Adding the "/r" parameter instructs the system to restart.
4. Alternatively, you can use the "shutdown /s" command to shut down the PC instead of rebooting. This is helpful if you want to turn off the computer completely.
5. You can also include a time delay before the action takes place. For example, to restart the PC after a 60-second delay, type "shutdown /r /t 60" and press Enter. Adjust the time delay (in seconds) to your preference.
6. If you want to use CMD to boot the PC from an external device or bootable USB, you need to access the boot menu. Restart the computer and look for a key (usually F12 or Esc) to enter the boot menu during startup. Consult your PC’s user manual or the manufacturer’s website for specific instructions.
7. Once in the boot menu, use the arrow keys to select the desired boot device, such as a USB drive, and press Enter to start the booting process.
Remember, using Command Prompt to boot a PC requires administrative privileges. Exercise caution when using these commands, as they directly affect your computer’s operations.
How to install using cmd?
To install software using the command prompt (cmd) in Windows, you can follow these steps:
1. Download the software: First, ensure that you have downloaded the software package or installer file from the official website or a trusted source.
2. Open the command prompt: Press the Windows key + R to open the Run dialog box. Type "cmd" and press Enter. This will open the command prompt window.
3. Navigate to the installation directory: Use the "cd" command to navigate to the directory where the installation file is located. For example, if the installer is in the Downloads folder, you can enter the command "cd Downloads".
4. Run the installer: Once you’ve navigated to the correct directory, run the installer by typing the name of the executable file and pressing Enter. The installer may have a specific filename extension like .exe or .msi. For example, if the installer is named "setup.exe", you would enter "setup.exe" and hit Enter.
5. Follow the installation instructions: Depending on the software package, you may need to provide input or select certain options during the installation process. Read the prompts carefully and follow any on-screen instructions to complete the installation.
6. Wait for the installation to finish: The installer will handle the installation process, copying the necessary files and configuring the software on your system. Wait for the installation to complete.
7. Verify the installation: Once the installation is finished, you can verify that the software has been successfully installed by opening the software or checking the installation directory for any specific files or shortcuts associated with the software.
Remember, the specific command or procedure may vary depending on the software, so it’s always a good idea to refer to the software’s documentation or support resources if available.
What is the CMD key for boot?
When it comes to booting a Mac, the CMD key (Command key) plays a crucial role in accessing various boot options and functionalities. Here are the steps to utilize the CMD key for booting:
1. Power on or restart your Mac.
2. As soon as you hear the startup chime, press and hold the CMD key on your keyboard.
3. Keep holding the CMD key until you see the Apple logo or a spinning globe on the screen.
4. If the Apple logo or spinning globe appears, it means you have successfully entered the boot sequence.
5. Now, you can release the CMD key and proceed with the desired boot option.
It’s important to note that the specific boot options available may vary depending on your Mac model and the version of macOS or Mac OS X you’re running. However, here are some common scenarios where you might use the CMD key during boot:
– Safe Mode: Press and hold the CMD key during startup to boot into Safe Mode, which is useful for troubleshooting issues by isolating problematic software or drivers.
– Recovery Mode: Press and hold CMD+R during startup to access the built-in Recovery Mode. From here, you can perform various system-related tasks like reinstalling macOS, repairing disk permissions, or restoring from a Time Machine backup.
– Startup Manager: Press and hold the Option key (Alt) while holding the CMD key to enter Startup Manager. This allows you to choose a startup disk or boot from an external drive.
– Single User Mode: Press and hold CMD+S during startup to enter Single User Mode, which provides a command line interface for advanced troubleshooting and maintenance tasks.
– Verbose Mode: Press and hold CMD+V during startup to enter Verbose Mode, where you can view detailed system messages as macOS boots up. This can be helpful for diagnosing boot-related issues.
By understanding the functionalities associated with the CMD key during boot, you can leverage these options to troubleshoot problems, access advanced settings, or perform specific tasks on your Mac.
How do I get to Windows installation from command prompt?
To access the Windows installation from the command prompt, you can follow these steps:
1. Boot your computer: Start or restart your computer, and before the Windows logo appears, press the necessary key to enter the BIOS or boot menu. This key is typically displayed on the screen during startup and can vary depending on your manufacturer.
2. Choose bootable media: Use the arrow keys to select the bootable media that contains the Windows installation files, such as a USB flash drive or DVD. Press Enter to boot from the selected media.
3. Language and keyboard selection: Once the installation process begins, you may be prompted to choose your preferred language, time, currency format, and keyboard layout. Select the appropriate options and click Next.
4. Select the Repair Your Computer option: In the next screen, instead of clicking Install Now, look for and click on the Repair Your Computer link located at the bottom left corner of the window.
5. Choose Troubleshoot: In the following Troubleshoot screen, select Advanced options to get to the command prompt.
6. Access command prompt: Within the Advanced options screen, locate and choose Command Prompt. This will launch the command prompt, where you can run various commands for troubleshooting or system repair.
Please note that accessing the command prompt during the Windows installation process is primarily done for advanced troubleshooting or repair purposes. It is a powerful tool that should be used with caution and proper knowledge.
How to install Windows 10 on cmd from USB?
To install Windows 10 from a USB using the Command Prompt (CMD), you can follow the steps outlined below:
1. Prepare the USB: Ensure that you have a USB drive with sufficient storage capacity (at least 8GB) and backup any important data on it, as it will be formatted during the installation process. Additionally, make sure you have a valid Windows 10 ISO file downloaded or a physical installation disc.
2. Create a bootable USB: You’ll need to create a bootable USB drive using the Windows USB/DVD Download Tool or third-party tools like Rufus. These tools will take the ISO file and make the USB bootable with the Windows 10 installation files.
3. Connect the USB and access CMD: Insert the bootable USB into a USB port on the computer where you want to install Windows 10. Boot or restart the computer and go into the BIOS settings to change the boot order to prioritize USB booting. Save the changes and exit the BIOS, allowing the computer to restart.
4. Select the installation language and other preferences: Once your computer boots from the USB, you’ll see the Windows 10 setup screen. Choose your preferred language, time, and keyboard input method, and then click "Next" to continue.
5. Access the Command Prompt (CMD): On the Windows Setup screen, click on "Repair your computer" at the bottom left. In the next window, select "Troubleshoot" and then choose "Command Prompt." This will open the Command Prompt window.
6. Initialize the installation process: In the Command Prompt, enter the following command: "diskpart" (without quotes) and press Enter. This will open the DiskPart utility, which allows you to manage your computer’s drives.
7. Select the USB drive: Enter the command "list disk" and press Enter. This will display a list of disks connected to your computer. Identify your USB drive from the list (make sure you select the correct one!) and note its Disk number.
8. Clean and format the USB drive: Now, enter the following commands one by one, pressing Enter after each command:
a. "select disk x" (replace "x" with the Disk number of your USB drive)
b. "clean" (this will remove all data on the selected disk)
c. "create partition primary" (this will create a new primary partition)
d. "select partition 1"
e. "active"
f. "format fs=ntfs quick" (this will format the partition as NTFS)
g. "assign"
h. "exit" (to exit the DiskPart utility)
9. Copy Windows files to the USB: Navigate to the Windows 10 installation files on your USB drive (usually in a folder named "Sources" or "ISO"), and copy them using the "xcopy" command to the root of the formatted USB drive. For example: "xcopy D:\*.* /s/e/f E:\" (replace "D" with the source drive letter and "E" with the USB’s drive letter).
10. Begin the installation: Once the files are successfully copied, type "exit" in the Command Prompt to close it. On the Windows Setup screen, click "Install now" and follow the on-screen instructions to complete the installation of Windows 10.
Remember to activate your Windows 10 license and complete the necessary setup steps after installation.
Note: The steps provided are meant to be a general guide and may vary slightly depending on the specific hardware or software configurations. Always refer to official documentation or seek further assistance if needed.